Eibach PRO-TRUCK-LIFT Stage 1
E80-82-066-02-22 matches front lift springs with front and rear PRO-TRUCK Sport shocks for balanced road manners, suspension control and off-road capability. This is a spring-and-shock system requiring assembly, not a preassembled Coilover 2.0 package.
Vehicle fitment
2000–2006 Toyota Tundra, 4.7L V8, 4WD. The exact manufacturer application does not establish 2WD or V6 compatibility. Confirm engine and drivetrain before ordering; trim name alone is insufficient.
Included components and lift information
- Two front lift springs, F31-82-067-03-FA: D4336 illustrates average front lift values of 1.6 inches and 2.5 inches at its depicted settings with Eibach PRO-LIFT-KIT springs. Refer to the complete page 3 chart for the correct retaining-ring position; upper settings marked for extra weight must only be used accordingly.
- Two front Sport shocks, 82115.8003: used with the front springs and the correct spring-perch setting.
- Two rear Sport shocks, 82115.8004: damping components, not rear lift-producing parts. D4336 does not state their numerical rear lift accommodation range.
- Two retaining-ring kits, 84-1804.0
- Two nylon cable ties, H70065500
- Two dust boots, 84-2015
Contents follow the exact-kit D4336 packing list. No rear lift springs, blocks or add-a-leaves are listed. The front chart values are average heights at illustrated settings, not a guarantee of identical lift on every truck or a continuously adjustable range.
Features
- Matched lift-spring and shock system designed for increased travel and performance
- Springs manufactured using Eibach off-road race spring technology and OE quality standards
- Individually tested shocks for matched performance
- Designed to balance ride quality, control and off-road capability
- Made in the USA
- Two-year warranty, subject to Eibach terms
Installation notes
D4336 requires transferring the original front spring perch from the OE strut assembly to the Eibach Sport damper. Follow its height chart rather than applying settings from another kit. Inspect original mounting hardware and replace it where necessary with the appropriate quality and style.
Install the rear shocks with the dust boots facing down so moisture can escape, as specified by D4336. Check brake-line, wiring and exhaust clearance before driving. After 10 miles, inspect the installation, recheck fastener torque and verify clearance. Do not disassemble the shocks.
Eibach exact-kit features and fitment
D4336 contents, installation and front height chart