Eibach PRO-TRUCK Rear Reservoir Shock
E60-82-067-03-01 adds external-reservoir damping to compatible Toyota Tundra rear suspension applications. The reservoir helps dissipate heat during off-road use, supporting consistent damping when the suspension is working repeatedly over rough terrain. Sold as one rear shock, not a pair.
Vehicle fitment
Eibach's exact-part application rows list:
- 2007–2015 Toyota Tundra 2WD and 4WD
- 2016–2021 Toyota Tundra 2WD and 4WD
Confirm your exact vehicle and suspension configuration before ordering. The broad imported trim list is not independent confirmation of special-package compatibility, including TRD Pro. Eibach does not guarantee fitment, height or warranty coverage on unlisted applications. The installation sheet's older 2007+ heading does not extend current fitment beyond the manufacturer's listed 2021 applications.
Included components and rear lift compatibility
- One PRO-TRUCK reservoir shock, 82116.8004RR, supplied under E60-82-067-03-01. The existing listing specifies accommodation of 0–1.5 inches of rear lift; the exact product page and D3943 do not independently state that numerical range.
- One dust boot, 84-2024
- One zip tie, H70065500
Package contents follow Eibach D3943. The rear lift range describes suspension height accommodated, not lift created by the shock. Springs, blocks, front components and a second rear shock are not listed in this package.
Construction and features
- External reservoir for improved damping performance and off-road heat dissipation
- Increased-travel design for lifted vehicles
- High-pressure monotube construction with a heavy-duty 46mm piston
- Nitro-coated piston shaft
- Durable zinc coating with billet aluminum fittings, rod ends and reservoir clamps
- Engineered, tested and manufactured by Eibach in the USA
- Two-year warranty, subject to Eibach terms
Important installation details
D3943 specifies positioning the reservoir toward the top and pointing away from the axle on both sides of the vehicle. Reuse the upper stem bushings in the same order as removal. Follow the complete instructions and vehicle service information for mounting hardware, torque and clearance checks.
Inspect shock mounts before installation and verify clearance around brake lines, wiring and exhaust before driving. Eibach calls for another installation inspection, torque recheck and clearance check after 10 miles. Do not disassemble the shock.
Eibach exact-part applications and features
D3943 contents, reservoir orientation and installation