Eibach PRO-TRUCK-LIFT Stage 2R Kit
Eibach E86-82-105-02-22 combines adjustable front PRO-TRUCK-COILOVER 2.0 assemblies, rear PRO-TRUCK Reservoir Sport shocks and rear PRO-LIFT-KIT springs. This Stage 2R system provides threaded front ride-height adjustment and external-reservoir rear damping for compatible fourth-generation Tacoma trucks.
Exact vehicle fitment
2024–2026 Toyota Tacoma N400 Double Cab, 2.4L turbo non-hybrid, RWD or 4WD. Eibach lists SR5, TRD Sport, TRD Off-Road, TRD Sport Premium, TRD Off-Road Premium and Limited configurations.
Excludes Adaptive Variable Suspension (AVS) models. Hybrid, TRD Pro, Trailhunter, XtraCab and other unlisted applications are not claimed compatible.
Included system and component references
- E86-82-105-02-22 complete Stage 2R package: front coilover pair, rear reservoir shocks and rear lift springs
- Front coilover assemblies: linked D4273 identifies two 82134.9003 assemblies, one ETCO2.0 spanner wrench and four 8001568 lower bushing spacers for the front subkit.
- Rear springs: linked D4272 identifies two F31-82-105-01-RA springs for rear spring subkit E30-82-105-01-02.
- Rear reservoir shocks: linked D4333 identifies shock component 82134.8004RR for individual shock E60-82-105-02-01. Its single-shock packing list is not the complete Stage 2R packing list.
Lift and preload setup
The exact-kit page does not specify numerical front and rear lift heights. Actual lift depends on vehicle package and weight distribution; no height range from another kit is substituted here.
Eibach states that the front out-of-the-box setting levels with the original rear spring. Additional front preload is required to level with the included Eibach rear spring. The rear springs produce rear lift; the rear shocks themselves do not raise the truck.
Front collar limit: do not exceed 86mm from the bottom of the collar to the base, measured exactly as illustrated on page 6 of D4273. Eibach warns that exceeding this limit damages the shock and suspension. The collar dimension is not vehicle lift height.
Construction and installation
- Threaded-height-adjustable front coilovers and external-reservoir rear shocks
- Anodized 6061-T6 billet aluminum coilover mounts
- 46mm pistons and nitrogen-filled monotube construction with variable-force valving
- Individually dyno-tested dampers and cycle-tested heavy-duty bushings
- Engineered, tested and manufactured by Eibach in the USA
Use the complete matched system. D4272 warns against using its leveling springs with OE shocks and requires extended-travel shocks to avoid suspension damage. Follow all three installation documents for front lower-bushing spacers, rear spring installation, reservoir orientation, clearances and post-installation checks.
Warranty and manufacturer references
Eibach lists a two-year warranty subject to its terms and does not guarantee fitment, height or warranty coverage on unlisted applications.
Eibach exact-kit fitment, features and setup notes
D4273 front coilover installation and collar limit
D4272 rear spring instructions
D4333 rear reservoir shock instructions