ReadyLIFT 69-21150 1.5-Inch SST Lift Kit for 2021–2026 Ford Bronco Sport

ReadyLIFT 1.5-Inch SST Lift Kit for Ford Bronco Sport

ReadyLIFT 69-21150 adds a taller stance and clearance for larger tires while retaining the factory suspension's basic layout. Its offset front strut extensions and rear spacer/subframe-drop arrangement are engineered to preserve suspension geometry and factory driving dynamics. This is a spacer-based lift system, not a set of replacement shocks, springs or assembled coilovers.

Fitment

• 2021–2026 Ford Bronco Sport: select applications only.
• Not compatible with Badlands or First Edition models.
• This is a Bronco Sport application, not the full-size Ford Bronco.
• ReadyLIFT also lists select 2022–2026 Ford Maverick applications for this part, but excludes hybrid engines. Confirm the exact vehicle configuration before purchase.

Included components and lift

• 69-21150 front strut spacer system: provides approximately 1.5 inches of front vehicle lift. Offset-designed heavy-duty steel top-mount extensions reposition the front struts to help avoid interference.
• 69-21150 rear spring/spacer system: provides approximately 1.5 inches of rear vehicle lift.
• Supporting components listed by ReadyLIFT: front end-link drop brackets and end links, rear trailing-arm spacers, heavy-duty steel rear spacers, CNC-machined billet aluminum rear subframe spacers, mounting hardware and instructions.

Individual component quantities and separate subcomponent part numbers are not specified on the product page. Vehicle lift is not the same as physical spacer thickness, and the subframe spacers are geometry-correction components rather than an additional lift to add to the stated 1.5 inches.

Design and everyday use

The offset front design adjusts strut position, while the rear spacer and subframe arrangement helps retain rear suspension geometry. ReadyLIFT describes the system as engineered to retain factory ride and handling and factory G.O.A.T. modes on the applicable Bronco Sport. Wheel and tire selection can still change ride firmness, steering feel, noise and fuel economy.

Wheel and tire guidance

ReadyLIFT lists up to a 245/65R17 tire on a 17x8 wheel with +40mm offset, using a Falken Wildpeak A/T3W tire and Motegi Racing MR144 wheel as its stated example. Minor trimming may be necessary depending on the tire brand and tread design. This is not a universal no-rub guarantee: test-fit the actual wheel and tire combination and check clearance throughout steering and suspension travel.

Installation

ReadyLIFT describes the suspension kit as bolt-on, with an estimated installation time of about four hours, plus or minus half an hour, excluding alignment and wheel/tire assembly. Installation by a certified mechanic is recommended. Read the complete manufacturer instructions before starting; do not infer torque values or installation procedures from this listing.

ReadyLIFT exact-part details and application restrictions | Manufacturer installation instructions

Product identification and packing

Manufacturer part number: 69-21150. Store SKU: BKMQ-69-21150. GTIN: 00194933153794. Existing distributor packing data lists one kit, 11 x 3 x 14 inches and 17 lb.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.